This term for technology I'm in plastics. So far I have made a dice. How did I make the dice:
1.First the teacher gave us a square piece of Acrylic plastic, and we had to do all the measurements and put all the dots in the right places. Did you know that if you add each side of the dice together it will equal 7.
2. Now we had to drill the holes and sand the edges so that we could actually role the dice as before the edges were sharp.
3.Then we use another sander to sand of the pencil lines and marks then we sand it with the yellow sander.
4. After that we use the black sander which helps to make it a bit more see through. Next we put some polish putty stuff onto the dice and got a cloth to polish it.
5. Then we used the buffer machine to make the dice see through. Then we drilled the holes again to get all the extra putty out.
6. The final step was to paint into the hole, I chose to paint mine purple.
Now I am making a name tag/key chain, for my dad for his birthday on the 19th of June. So far this year I have really enjoyed going to tech and I can't wait for sewing next term!
Thank you for reading my blog :)
What colour would you paint your dice?
Bye:)
No comments:
Post a Comment
To support my learning I ask you to comment as follows:
1. Something positive - Begin with a greeting. Talk about something you like about what I have shared.
2. Thoughtful - A comment that will mean something to me to let me know you read/watched or listened to what I had to say. - use any language.
3. Something helpful - Give me some ideas for next time or ask me a question.
Encourage me to make another post
Note: Only a member of this blog may post a comment.